You might be inviting humidity into your residence separate from even knowing it by setting your A/C machine thermostat fan to On instead of Auto.
On as well as Auto are the basic settings for your fan. The actual difference between ON as well as AUTO boils down to when the fan is easily blowing. In the Auto position, the fan only works during an A/C cooling cycle. In the On position, the fan blows pretty much constantly, even when the A/C machine isn’t cooling. This also means that it utilizes more energy as well as costs more. To better understand how a fan affects indoor humidity levels, first you should recognize what the A/C machine fan does as well as where it happens to be located. If you have a split system AC, you without a doubt have numerous fans in your A/C machine. One fan for your outdoor machine as well as one fan for your indoor machine. Your indoor machine fan sits behind the cooling coils as well as is basically responsible for pushing air through the ducts as well as into your residence. Basically, the On setting is not allowing your A/C machine to officially dehumidify your residence. Your A/C has some important jobs. It cools your house as well as dehumidifies it. When hot air from inside your residence is pulled into your indoor HVAC machine, it passes over chilly refrigerant coils. Those cooling coils absorb the warmth as well as moisture from the air. Then, that chilly dry air is moved back into your residence. If the fan is set to Auto, that moisture collects as well as sits on the refrigerant coils. Once the fan turns off in between cooling cycles, that moisture has a bit of time to slide off the coils as well as drain away outdoors. But, if the fan is set to On, the moisture on the refrigerant coils does not get the opportunity to drain away. Because the fan blows basically constantly, most of the moisture evaporates as well as gets blown directly back into your residence.
Indoor comfort business