When the air leaked from the several imperfections, the particles gathered along the edges plus created an airtight seal
Last summer, I noticed that several rooms of the house felt warmer than others. Certain areas were downright boiling, even though the air conditioner was running more often than normal. When I started paying closer attention, I realized that there was an excess of dust circulating in the air plus a slight musty aroma. Thinking there was a complication with the air conditioner, I tied up a repair. The corporation who diagnosed the cooling component found nothing more than a slight buildup of dust within the inner workings. When the two of us diagnosed the ductwork, but, she confirmed that approximately 25% of our conditioned air was leaking out of flaws in the pipes. Holes in the ducts plus cracks at the seams were not only allowing air to escape but also drawing in outside air plus contaminants. Because the maximum amount of air wasn’t being distributed throughout the house, the air conditioner was forced to toil harder to meet temperature control settings. The wear plus tear would have eventually led to a malfunction or even premature failure, and plus, I was paying higher utility bills for reduced comfort. The duct sealing process was quick plus effective. The corporation blocked off the supply plus return vents plus then pumped pressurized air into the system. This air was laced with non-polymer particles that are adhesive. When the air leaked from the several imperfections, the particles gathered along the edges plus created an airtight seal. By sealing the ducts from the inside, there was no injure to the house plus no mess. The duct sealing process was guided by a laptop program, plus the corporation performed testing to verify the results.